Sandeep B. Posted June 4, 2023 Share Posted June 4, 2023 Update Roundcube on CWP, the new Version of Roundcube 1.5 LTS have clear Interface with modern look also in this version some major security holes were fixed. It is recommended to update the roundcube to latest version. Step1 Install Required php extension INTL in CWP :- Centos 7/EL7 : To install INTL : yum update ca-certificates -y rpm -ivh https://github.com/mysterydata/md-disk/raw/main/libicu69-69.1-4.el7.x86_64.rpm curl -s -L https://www.alphagnu.com/upload/tmp/cwp_rc_fix.sh | bash To remove INTL : curl -s -L https://www.alphagnu.com/upload/tmp/cwp_rc_fix_remove.sh | bash Centos 8 stream/EL8 : To install INTL : dnf update ca-certificates -y rpm -ivh https://github.com/mysterydata/md-disk/raw/main/libicu69-69.1-4.el8.x86_64.rpm curl -s -L https://www.alphagnu.com/upload/tmp/el8/cwp_rc_fix_el8.sh | bash To remove INTL : curl -s -L https://www.alphagnu.com/upload/tmp/cwp_rc_fix_remove.sh | bash Step 2 Download roundcube script from official source : cd /usr/local/src rm -rf roundcube* wget https://github.com/roundcube/roundcubemail/releases/download/1.5.8/roundcubemail-1.5.8-complete.tar.gz Now extract the archive file : tar xf roundcubemail-1.5.8-complete.tar.gz Step 3 Update the Roundcube installation : cd roundcubemail-1.5.8 sed -i "s@\/usr\/bin\/env php@\/usr\/bin\/env \/usr\/local\/cwp\/php71\/bin\/php@g" /usr/local/src/roundcubemail-1.5.8/bin/installto.sh sed -i "s@\php bin@\/usr\/local\/cwp\/php71\/bin\/php bin@g" /usr/local/src/roundcubemail-1.5.8/bin/installto.sh bin/installto.sh /usr/local/cwpsrv/var/services/roundcube Installation Instructions : Upgrading from 1.4.11. Do you want to continue? (y/N) type : y and hit enter At last you’ll see this message upon installation complete : Running update script at target... Executing database schema update. Updating database schema (2020020100)... [OK] Updating database schema (2020020101)... [OK] Updating database schema (2020091000)... [OK] Updating database schema (2020122900)... [OK] This instance of Roundcube is up-to-date. Have fun! All done. All done check by login into roundcube Link to comment Share on other sites More sharing options...
Plamen K. Posted June 13, 2023 Share Posted June 13, 2023 Hello, after update step by step everything is fine well just like your example but now after login in webmail return this error: Server error! (Internal Server Error) Any idea how to fix it? Link to comment Share on other sites More sharing options...
Sandeep B. Posted June 13, 2023 Author Share Posted June 13, 2023 4 hours ago, Plamen K. said: Hello, after update step by step everything is fine well just like your example but now after login in webmail return this error: Server error! (Internal Server Error) Any idea how to fix it? Hi internal server error is not expected in update process, you maybe have issue with other thing. Try to restart cwp services : sh /scripts/restart_cwpsrv Link to comment Share on other sites More sharing options...
Solution Sandeep B. Posted June 13, 2023 Author Solution Share Posted June 13, 2023 I've fixed it please rerun the commands before running the above script run this command : curl -s -L https://www.alphagnu.com/upload/tmp/cwp_rc_fix_remove.sh | bash 1 Link to comment Share on other sites More sharing options...
Starburst Posted September 27, 2023 Share Posted September 27, 2023 Current version is Roundcube Webmail 1.6.3 You just have to change where it says 1.5.3 to 1.6.3 As always with update, do a backup or snapshot first. 1 Link to comment Share on other sites More sharing options...
Sandeep B. Posted September 27, 2023 Author Share Posted September 27, 2023 14 hours ago, Starburst said: Current version is Roundcube Webmail 1.6.3 You just have to change where it says 1.5.3 to 1.6.3 As always with update, do a backup or snapshot first. it requires php 7.3 and not fully supported with CWP as it uses php 7.2 as core php version Link to comment Share on other sites More sharing options...
Starburst Posted September 29, 2023 Share Posted September 29, 2023 On 9/27/2023 at 7:27 PM, Sandeep B. said: it requires php 7.3 and not fully supported with CWP as it uses php 7.2 as core php version Just tried the 1.6.3 upgrade and gave: # bin/installto.sh /usr/local/cwpsrv/var/services/roundcube Unsupported PHP version. Required PHP >= 7.3. So since CWP still uses the obsolete PHP 7.1, we are limited to old version of RoundCube. Is there an ETA when CWP might finally make it to PHPP 8.1, 8.2 or the new 8.3 RC? No to mention 0.9.8.1170 is behind on it's PHP version now by quite a bit with 8.1 & 8.2. Link to comment Share on other sites More sharing options...
Sandeep B. Posted September 29, 2023 Author Share Posted September 29, 2023 cwp uses 7.2 and yes 7.4 will be released soon for cwp service its under test with el9 roundcube 1.5 is still supported by the developers as it is LTS version and security patches will be maintained by the devs. Link to comment Share on other sites More sharing options...
leisegang Posted October 31, 2023 Share Posted October 31, 2023 i tried upgrading ti version 1.5.5 and the problem is that roundcube says imap connection failed. What am i doing wrong,. i am also iunable to downgrade to version 1.5.4 i used 1.5.5 because of an security update Link to comment Share on other sites More sharing options...
Sandeep B. Posted October 31, 2023 Author Share Posted October 31, 2023 ensure that dovecot service is running systemctl status dovecot Link to comment Share on other sites More sharing options...
Fidolas Posted November 27, 2023 Share Posted November 27, 2023 On 6/4/2023 at 3:29 PM, Sandeep B. said: Step 3 Update the Roundcube installation : cd roundcubemail-1.5.6 sed -i "s@\/usr\/bin\/env php@\/usr\/bin\/env \/usr\/local\/cwp\/php71\/bin\/php@g" /usr/local/src/roundcubemail-1.5.4/bin/installto.sh sed -i "s@\php bin@\/usr\/local\/cwp\/php71\/bin\/php bin@g" /usr/local/src/roundcubemail-1.5.4/bin/installto.sh bin/installto.sh /usr/local/cwpsrv/var/services/roundcube I believe that there is an error in these lines. It should say: cd roundcubemail-1.5.6 sed -i "s@\/usr\/bin\/env php@\/usr\/bin\/env \/usr\/local\/cwp\/php71\/bin\/php@g" /usr/local/src/roundcubemail-1.5.6/bin/installto.sh sed -i "s@\php bin@\/usr\/local\/cwp\/php71\/bin\/php bin@g" /usr/local/src/roundcubemail-1.5.6/bin/installto.sh bin/installto.sh /usr/local/cwpsrv/var/services/roundcube So the example is about 1.5.6 version. I'm trying to follow these steps but using the latest one to date https://github.com/roundcube/roundcubemail/releases/download/1.6.5/roundcubemail-1.6.5-complete.tar.gz But it complains that "Unsupported PHP version. Required PHP >= 7.3" I suppose that there is no solution until CWP gets updated to use PHP > 7.3 Anyway, thanks a lot, as always, for detailed instructions. Link to comment Share on other sites More sharing options...
Sandeep B. Posted November 27, 2023 Author Share Posted November 27, 2023 yes 1.6 is not supported in cwp at this time. Link to comment Share on other sites More sharing options...
Fidolas Posted November 27, 2023 Share Posted November 27, 2023 I'm also having "Server error!" into the Roundcube interface after updating. Not sure if there are necessary changes into the config.inc.php in roundcube installation folder. Do I need to change anything there? Link to comment Share on other sites More sharing options...
Fidolas Posted November 27, 2023 Share Posted November 27, 2023 Ok. Forget about my previous message. I had to run this: curl -s -L https://www.alphagnu.com/upload/tmp/cwp_rc_fix.sh | bash but AFTER the installation. Not sure why. Now it works and no "Server error!" messages anymore. Link to comment Share on other sites More sharing options...
vtheod Posted December 15, 2023 Share Posted December 15, 2023 Hello, I followed the instructions above and updated Roundcube to 1.5.6, but it doesn't display any messages. It just gives error, "Server Error! (error)" Also, I can send emails. Below the Roundcube status: dovecot.service - Dovecot IMAP/POP3 email server Loaded: loaded (/usr/lib/systemd/system/dovecot.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2023-12-15 14:17:39 EET; 48min ago Docs: man:dovecot(1) https://doc.dovecot.org/ Process: 1036240 ExecStop=/usr/bin/doveadm stop (code=exited, status=0/SUCCESS) Process: 1036245 ExecStartPre=/usr/libexec/dovecot/prestartscript (code=exited, status=0/SUCCESS) Main PID: 1036252 (dovecot) Tasks: 26 (limit: 408567) Memory: 27.1M CGroup: /system.slice/dovecot.service ├─1036252 /usr/sbin/dovecot -F ├─1036254 dovecot/anvil ├─1036255 dovecot/log ├─1036256 dovecot/config ├─1036258 dovecot/imap-login ├─1036259 dovecot/stats ├─1036260 dovecot/auth ├─1036261 dovecot/imap-login ├─1036262 dovecot/imap-login ├─1036263 dovecot/imap-login ├─1036264 dovecot/imap-login ├─1036265 dovecot/imap-login ├─1036266 dovecot/auth -w ├─1036268 dovecot/imap ├─1036270 dovecot/imap ├─1036272 dovecot/imap ├─1036273 dovecot/imap ├─1036274 dovecot/imap ├─1036275 dovecot/imap ├─1057834 dovecot/imap-login ├─1057841 dovecot/imap ├─1057912 dovecot/imap-login ├─1057913 dovecot/imap ├─1057921 dovecot/imap-login ├─1057922 dovecot/imap └─1059197 dovecot/imap-login Dec 15 14:17:39 example.com systemd[1]: Starting Dovecot IMAP/POP3 email server... Dec 15 14:17:39 example.com systemd[1]: Started Dovecot IMAP/POP3 email server. Link to comment Share on other sites More sharing options...
Sandeep B. Posted December 16, 2023 Author Share Posted December 16, 2023 17 hours ago, vtheod said: Hello, I followed the instructions above and updated Roundcube to 1.5.6, but it doesn't display any messages. It just gives error, "Server Error! (error)" Also, I can send emails. Below the Roundcube status: dovecot.service - Dovecot IMAP/POP3 email server Loaded: loaded (/usr/lib/systemd/system/dovecot.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2023-12-15 14:17:39 EET; 48min ago Docs: man:dovecot(1) https://doc.dovecot.org/ Process: 1036240 ExecStop=/usr/bin/doveadm stop (code=exited, status=0/SUCCESS) Process: 1036245 ExecStartPre=/usr/libexec/dovecot/prestartscript (code=exited, status=0/SUCCESS) Main PID: 1036252 (dovecot) Tasks: 26 (limit: 408567) Memory: 27.1M CGroup: /system.slice/dovecot.service ├─1036252 /usr/sbin/dovecot -F ├─1036254 dovecot/anvil ├─1036255 dovecot/log ├─1036256 dovecot/config ├─1036258 dovecot/imap-login ├─1036259 dovecot/stats ├─1036260 dovecot/auth ├─1036261 dovecot/imap-login ├─1036262 dovecot/imap-login ├─1036263 dovecot/imap-login ├─1036264 dovecot/imap-login ├─1036265 dovecot/imap-login ├─1036266 dovecot/auth -w ├─1036268 dovecot/imap ├─1036270 dovecot/imap ├─1036272 dovecot/imap ├─1036273 dovecot/imap ├─1036274 dovecot/imap ├─1036275 dovecot/imap ├─1057834 dovecot/imap-login ├─1057841 dovecot/imap ├─1057912 dovecot/imap-login ├─1057913 dovecot/imap ├─1057921 dovecot/imap-login ├─1057922 dovecot/imap └─1059197 dovecot/imap-login Dec 15 14:17:39 example.com systemd[1]: Starting Dovecot IMAP/POP3 email server... Dec 15 14:17:39 example.com systemd[1]: Started Dovecot IMAP/POP3 email server. Did you followed all steps? Any error recieved? Link to comment Share on other sites More sharing options...
vtheod Posted December 16, 2023 Share Posted December 16, 2023 I received no errors Link to comment Share on other sites More sharing options...
Sandeep B. Posted December 16, 2023 Author Share Posted December 16, 2023 39 minutes ago, vtheod said: I received no errors try to uninstall the fix with the upper script and install it again Link to comment Share on other sites More sharing options...
vtheod Posted December 16, 2023 Share Posted December 16, 2023 1 hour ago, Sandeep B. said: try to uninstall the fix with the upper script and install it again How to uninstall? What to run? Link to comment Share on other sites More sharing options...
vtheod Posted December 28, 2023 Share Posted December 28, 2023 On 12/16/2023 at 8:45 PM, Sandeep B. said: try to uninstall the fix with the upper script and install it again I followed the instructions from the beginning a lot of times but with no success. Am I missing something? Link to comment Share on other sites More sharing options...
Dutch_Mike Posted February 21 Share Posted February 21 Hi Sandeep, Followed your instructions and it worked almost flawless. the version numbers do not mach in some command lines.. After i changed it it worked as expected. I marked the errors. thanks 1 Link to comment Share on other sites More sharing options...
Sandeep B. Posted February 22 Author Share Posted February 22 thanks @Dutch_Mike typo fixed Link to comment Share on other sites More sharing options...
torettos Posted February 26 Share Posted February 26 I have the DOS protection on frequent requests return 403 ... but on normal RoundCube operations like delete and etc. it activates too often. Can i fix this just for the RoundCube or do I need to raise the request count for the entire server? Link to comment Share on other sites More sharing options...
Mah1973 Posted April 6 Share Posted April 6 Thanks , worked just fine. Link to comment Share on other sites More sharing options...
Netino Posted June 17 Share Posted June 17 (edited) I had the same internal server error and was unable to resolve the issue until now. Apparently it's something related to the ICU library, which should be >=4.2. Among some installations, I have an old CWP installation and it may be that some necessary libraries are missing over time. I disabled WAF and the problem persists. So I decided to follow the workaround pointed out here: https://www.roundcubeforum.net/index.php?topic=29678.0 At least now I can use roundcube. EDIT: Strangely, I checked the problem was my old CWP installation hadn't the directory '/usr/local/cwp/php71/php.d', because I was being deleted it in the first step "To remove INTL". So, I execute the same steps, without removing it, and the problem was solved without the above workaround. Regards, Netino Edited June 17 by Netino Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now