Install latest version of php 8.4 PHP switcher in CWP- Control web panel - EL8/9 AlmaLinux 8/9 - CWP - Control WEB Panel

December 3Dec 3

This is a tutorial for PHP 8.4 installation in CWP PHP Switcher

I've switched to direct compiler environment variables that pass flags straight to gcc, g++, and ld - eliminating pkg-config dependency that was failing across servers.

Old Method (Unstable):

pkg-config → generates flags → gcc/g++/ld
↓
Breaks when pkg-config .pc files missing/corrupted/version mismatch

New Method (Stable):

CFLAGS/CXXFLAGS/LDFLAGS → gcc/g++/ld directly
↓
No pkg-config intermediary = consistent builds everywhere

Install dependencies :

# For el9 only : 
dnf config-manager --set-enabled crb

# run these for el8 and el9
dnf groupinstall "Development Tools"
dnf install glibc-devel elfutils-libelf-devel
dnf install git make gcc gcc-c++ binutils glibc-devel autoconf libtool bison re2c automake libxml2-devel openssl-devel sqlite-devel bzip2-devel libcurl-devel libpng-devel libavif-devel libwebp-devel libjpeg-devel libXpm-devel freetype-devel gmp-devel libicu-devel openldap-devel oniguruma-devel libargon2-devel libtidy-devel libxslt-devel

Build PHP 8.4 switcher :

rm -rf /usr/local/php-84
mkdir -p /usr/local/php-84
cd /usr/local/php-84
wget http://php.net/distributions/php-8.4.15.tar.gz
tar zxvf php-8.4.15.tar.gz
cd php-8.4.15
./configure --with-config-file-path=/usr/local/php --enable-cgi --with-config-file-scan-dir=/usr/local/php/php.d --with-zlib=/usr --enable-mbstring --with-zip --enable-bcmath --enable-pcntl --enable-ftp --enable-exif --enable-calendar --enable-sysvmsg --enable-sysvsem --enable-sysvshm --with-tidy --with-curl --with-iconv --with-gmp --enable-gd --with-avif --with-jpeg --with-freetype --enable-gd-jis-conv --with-webp --with-xpm --with-openssl --with-pdo-mysql=mysqlnd --with-gettext=/usr --with-bz2=/usr --with-mysqli --enable-soap --enable-phar --with-xsl --enable-posix --enable-sockets --with-external-pcre --with-libdir=lib64 --with-mysql-sock=/var/lib/mysql/mysql.sock --enable-intl --with-password-argon2 --enable-litespeed --with-ldap=/usr --with-ldap-sasl=/usr 
export CFLAGS="-O2 -fPIE -DPIC"
export CXXFLAGS="-O2 -fPIE -DPIC"
export LDFLAGS="-pie -Wl,--as-needed"
make -j$(nproc)
make install

After that, PHP 8.4 will be installed. You can check via the php -v command :

[root@alma]# php -v
PHP 8.4.15 (cli) (built: Dec  3 2025 01:45:34) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.4.15, Copyright (c) Zend Technologies

December 3Dec 3

Hello @Sandeep B. Thank you for the tutorial.

I ran into a few problems under AlmaLinux 9.6, which this installation script has already fixed.

#!/bin/bash
set -euo pipefail
set -x

# For el9 only :
dnf config-manager --set-enabled crb

# run these for el8 and el9
dnf -y groupinstall "Development Tools"
dnf -y install glibc-devel elfutils-libelf-devel
dnf -y install git make gcc gcc-c++ \
  binutils glibc-devel autoconf libtool \
  bison re2c automake libxml2-devel openssl-devel \
  sqlite-devel bzip2-devel libcurl-devel libpng-devel \
  libavif-devel libwebp-devel libjpeg-devel \
  libXpm-devel freetype-devel gmp-devel \
  libicu-devel openldap-devel oniguruma-devel \
  libargon2-devel libtidy-devel libxslt-devel

# Build PHP 8.4 switcher:
rm -rf /usr/local/php-84
mkdir -p /usr/local/php-84
cd /usr/local/php-84
wget http://php.net/distributions/php-8.4.15.tar.gz
tar zxvf php-8.4.15.tar.gz
cd php-8.4.15

# For el9 mandatory: --with-openssl=/usr/lib64
./configure --with-config-file-path=/usr/local/php \
  --enable-cgi \
  --with-config-file-scan-dir=/usr/local/php/php.d \
  --with-zlib=/usr \
  --enable-mbstring \
  --with-zip \
  --enable-bcmath \
  --enable-pcntl \
  --enable-ftp \
  --enable-exif \
  --enable-calendar \
  --enable-sysvmsg \
  --enable-sysvsem \
  --enable-sysvshm \
  --with-tidy \
  --with-curl \
  --with-iconv \
  --with-gmp \
  --enable-gd \
  --with-avif \
  --with-jpeg \
  --with-freetype \
  --enable-gd-jis-conv \
  --with-webp \
  --with-xpm \
  --with-openssl=/usr/lib64 \
  --with-pdo-mysql=mysqlnd \
  --with-gettext=/usr \
  --with-bz2=/usr \
  --with-mysqli \
  --enable-soap \
  --enable-phar \
  --with-xsl \
  --enable-posix \
  --enable-sockets \
  --with-external-pcre \
  --with-libdir=lib64 \
  --with-mysql-sock=/var/lib/mysql/mysql.sock \
  --enable-intl \
  --with-password-argon2 \
  --enable-litespeed \
  --with-ldap=/usr \
  --with-ldap-sasl=/usr \
  --with-pear \
  --with-sodium

# These settings will break on el9 - AlmaLinux 9.6
# export CFLAGS="-O2 -fPIE -DPIC"
# export CXXFLAGS="-O2 -fPIE -DPIC"
# export LDFLAGS="-pie -Wl,--as-needed"

export PKG_CONFIG_PATH=/usr/lib64/pkgconfig
export CFLAGS="-O2"
export CXXFLAGS="-O2"
export LDFLAGS="-L/usr/lib64 -Wl,--as-needed"

make -j$(nproc)
make install

# ---------- remove old .ini from PHP 5.x, 7.x -----
rm -f /usr/local/php/php.d/sodium.ini

# ---------- PECL IMAGICK INSTALL ----------
echo "Installing Imagick dependencies…"
dnf -y install ImageMagick ImageMagick-devel

echo "Installing Imagick via PECL…"
/usr/local/bin/pecl install imagick

echo "Adding imagick.ini…"
mkdir -p /usr/local/php/php.d
echo "extension=imagick.so" > /usr/local/php/php.d/imagick.ini

echo "PHP CLI build with Imagick completed successfully!"
php -v
php -m | grep imagick

--with-openssl=/usr/lib64
--with-pear
--with-sodium
without the switches and with the recommended FLAG settings, PHP 8.4.15 did not compile properly.

And it may also be necessary to remove the old sodium.ini if it was left in the directory from PHP 5.x, 7.x.

rm -f /usr/local/php/php.d/sodium.ini

But with the above settings, all parts of PHP 8.4.15 are compiling properly in AlmaLinux 9.6.

[root@vps ~]# php -i | grep -i sodium
Configure Command =>  './configure'  '--with-config-file-path=/usr/local/php' '--enable-cgi' '--with-config-file-scan-dir=/usr/local/php/php.d' '--with-zlib=/usr' '--enable-mbstring' '--with-zip' '--enable-bcmath' '--enable-pcntl' '--enable-ftp' '--enable-exif' '--enable-calendar' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--with-tidy' '--with-curl' '--with-iconv' '--with-gmp' '--enable-gd' '--with-avif' '--with-jpeg' '--with-freetype' '--enable-gd-jis-conv' '--with-webp' '--with-xpm' '--with-openssl=/usr/lib64' '--with-pdo-mysql=mysqlnd' '--with-gettext=/usr' '--with-bz2=/usr' '--with-mysqli' '--enable-soap' '--enable-phar' '--with-xsl' '--enable-posix' '--enable-sockets' '--with-external-pcre' '--with-libdir=lib64' '--with-mysql-sock=/var/lib/mysql/mysql.sock' '--enable-intl' '--with-password-argon2' '--enable-litespeed' '--with-ldap=/usr' '--with-ldap-sasl=/usr' '--with-pear' '--with-sodium'
sodium
sodium support => enabled
libsodium headers version => 1.0.18
libsodium library version => 1.0.18

[root@vps ~]# php -i | grep -i openssl
Configure Command =>  './configure'  '--with-config-file-path=/usr/local/php' '--enable-cgi' '--with-config-file-scan-dir=/usr/local/php/php.d' '--with-zlib=/usr' '--enable-mbstring' '--with-zip' '--enable-bcmath' '--enable-pcntl' '--enable-ftp' '--enable-exif' '--enable-calendar' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--with-tidy' '--with-curl' '--with-iconv' '--with-gmp' '--enable-gd' '--with-avif' '--with-jpeg' '--with-freetype' '--enable-gd-jis-conv' '--with-webp' '--with-xpm' '--with-openssl=/usr/lib64' '--with-pdo-mysql=mysqlnd' '--with-gettext=/usr' '--with-bz2=/usr' '--with-mysqli' '--enable-soap' '--enable-phar' '--with-xsl' '--enable-posix' '--enable-sockets' '--with-external-pcre' '--with-libdir=lib64' '--with-mysql-sock=/var/lib/mysql/mysql.sock' '--enable-intl' '--with-password-argon2' '--enable-litespeed' '--with-ldap=/usr' '--with-ldap-sasl=/usr' '--with-pear' '--with-sodium'
SSL Version => OpenSSL/3.5.1
libSSH Version => libssh/0.10.4/openssl/zlib
openssl
OpenSSL support => enabled
OpenSSL Library Version => OpenSSL 3.5.1 1 Jul 2025
OpenSSL Header Version => OpenSSL 3.5.1 1 Jul 2025
Openssl default config => /etc/pki/tls/openssl.cnf
openssl.cafile => no value => no value
openssl.capath => no value => no value
OpenSSL support => enabled

Tuesday at 05:23 PM5 days

@TheHolbi Thanks for the script.

Getting the following error for some reason:
bash: ./PHP-8_4-Install: /bin/bash^M: bad interpreter: No such file or directory

Also with CWP on AlmaLinux 9.7:
How/where could you add the lines to install the PECL libraries for IMAP and mailparse?

Thanks

Edited Tuesday at 05:47 PM5 days by Starburst
Add error line

1 hour ago1 hr

On 12/9/2025 at 6:23 PM, Starburst said:
@TheHolbi Thanks for the script.
Getting the following error for some reason:
bash: ./PHP-8_4-Install: /bin/bash^M: bad interpreter: No such file or directory
Also with CWP on AlmaLinux 9.7:
How/where could you add the lines to install the PECL libraries for IMAP and mailparse?
Thanks

Hi @Starburst I have corrected the installation of the PECl modules for the PHP-FPM version only. You can find the installers of these modules in the External modules and Pre Run models ZIP files at the link, which ran in the AlmaLinux 9.6, 9.7 environment.
Here:
https://www.alphagnu.com/topic/614-how-to-add-custom-php-fpm-84-85-support-to-cwp-on-almalinux-9x/

1 hour ago1 hr

On 12/9/2025 at 6:23 PM, Starburst said:
@TheHolbi Thanks for the script.
Also with CWP on AlmaLinux 9.7:
How/where could you add the lines to install the PECL libraries for IMAP and mailparse?
Thanks

E.g: Pre run module for Imap (PHP-FPM 8.4, 8.5) and the compiler takes care of the rest.
The Pre run modules place is: /usr/local/cwpsrv/htdocs/resources/conf/el9/php-fpm_selector/pre_run/8.4/imap7.sh

#/bin/bash

dnf install uw-imap-devel -y

End External module for MailParse (PHP-FPM 8.4, 8.5)

#!/bin/bash
set -euo pipefail

# --- Detect PHP-FPM version (8.4 or 8.5) ---
if [ -x /opt/alt/php-fpm84/usr/bin/php-config ]; then
    PHPFPM="/opt/alt/php-fpm84"
elif [ -x /opt/alt/php-fpm85/usr/bin/php-config ]; then
    PHPFPM="/opt/alt/php-fpm85"
else
    echo "ERROR: No php-fpm84 or php-fpm85 found."
    exit 1
fi

PHPBIN="${PHPFPM}/usr/bin/php"
PHPCONFIG="${PHPFPM}/usr/bin/php-config"
PHPINIDIR="${PHPFPM}/usr/php/php.d"

echo "Detected PHP: ${PHPBIN}"

# --- Install dependencies ---
dnf -y install re2c file

cd /usr/local/src
rm -rf mailparse* mailparse.tgz

# --- Stable version: mailparse 3.1.6 ---
MAILPARSE_VERSION="3.1.6"
MAILPARSE_URL="https://pecl.php.net/get/mailparse-${MAILPARSE_VERSION}.tgz"

echo "Downloading mailparse ${MAILPARSE_VERSION}..."
wget -q "${MAILPARSE_URL}" -O mailparse.tgz

tar -xf mailparse.tgz
cd "mailparse-${MAILPARSE_VERSION}"

# --- Build ---
echo "Running phpize..."
"${PHPFPM}/usr/bin/phpize"

echo "Configuring..."
./configure --with-php-config="${PHPCONFIG}"

echo "Compiling..."
make -j"$(nproc)"
make install

# --- Check extension installation ---
EXTDIR="$(${PHPCONFIG} --extension-dir)"

if [ -f "${EXTDIR}/mailparse.so" ]; then
    echo "Creating mailparse.ini"
    echo "extension=mailparse.so" > "${PHPINIDIR}/mailparse.ini"
    echo "mailparse installed successfully."
else
    echo "ERROR: mailparse.so was not found in ${EXTDIR}"
    exit 1
fi

I hope this helped.

Look at the full article:
https://www.alphagnu.com/topic/614-how-to-add-custom-php-fpm-84-85-support-to-cwp-on-almalinux-9x/

Sign In

Install latest version of php 8.4 PHP switcher in CWP- Control web panel - EL8/9 AlmaLinux 8/9

Featured Replies

Create an account or sign in to comment

Topics

Install latest version of php 8.4 PHP switcher in CWP- Control web panel - EL8/9 AlmaLinux 8/9

Upgrade MariaDB 10.11 In CWP Centos 7 Centos 8 stream AlmaLinux 7/8 RockyLinux 7/8

How to Add Custom PHP-FPM 8.4 / 8.5 Support to CWP on AlmaLinux 9.x

Manual update of PHP in CWP

Install latest version of php 8.5 PHP switcher in CWP- Control web panel - EL8/9 AlmaLinux 8/9

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)